Diodes Incorporated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
PI3HDMI336FBE
Ver Detalle Hojas de datos

PI3HDMI336FBE

Product Overview

  • Category: HDMI Switch
  • Use: The PI3HDMI336FBE is a high-performance HDMI switch designed for use in consumer electronics devices such as televisions, set-top boxes, and gaming consoles.
  • Characteristics:
    • Supports up to 4 HDMI input ports and 1 HDMI output port.
    • High-speed signal switching with minimal latency.
    • Integrated equalization and pre-emphasis circuits for enhanced signal integrity.
    • Low power consumption and compact package size.
  • Package: The PI3HDMI336FBE is available in a small form factor package, making it suitable for space-constrained applications.
  • Essence: The essence of the PI3HDMI336FBE lies in its ability to seamlessly switch between multiple HDMI sources while maintaining high-quality video and audio signals.
  • Packaging/Quantity: The PI3HDMI336FBE is typically sold in reels or trays, with a quantity of 2500 units per reel.

Specifications

  • Input Ports: 4 x HDMI Type A
  • Output Port: 1 x HDMI Type A
  • Supported Resolutions: Up to 4K Ultra HD (3840x2160) at 60Hz
  • HDCP Support: HDCP 2.2 compliant
  • Power Supply: 3.3V
  • Operating Temperature: -40°C to +85°C
  • Package Dimensions: 3mm x 3mm, 16-pin QFN

Detailed Pin Configuration

The PI3HDMI336FBE features the following pin configuration:

  1. VCC
  2. GND
  3. HPD_IN
  4. TMDS0P
  5. TMDS0N
  6. TMDS1P
  7. TMDS1N
  8. TMDS2P
  9. TMDS2N
  10. TMDS3P
  11. TMDS3N
  12. CEC
  13. SCL
  14. SDA
  15. HPD_OUT
  16. VCC

Functional Features

  • Seamless switching between multiple HDMI sources.
  • Support for high-resolution video and audio formats.
  • Integrated equalization and pre-emphasis circuits for signal integrity.
  • Automatic detection and negotiation of HDMI features.
  • Low power consumption in standby mode.

Advantages and Disadvantages

Advantages: - High-performance HDMI switch with support for 4K Ultra HD resolution. - Compact package size suitable for space-constrained applications. - Integrated signal conditioning circuits for enhanced signal quality. - Low power consumption.

Disadvantages: - Limited to a maximum of 4 HDMI input ports. - May require additional external components for certain applications.

Working Principles

The PI3HDMI336FBE operates by receiving HDMI signals from multiple input sources and selectively routing them to the output port based on user or system control. It incorporates advanced signal conditioning techniques such as equalization and pre-emphasis to compensate for signal degradation over longer cable lengths. The device also supports HDCP encryption, ensuring secure transmission of copyrighted content.

Detailed Application Field Plans

The PI3HDMI336FBE is widely used in various consumer electronics devices, including:

  1. Televisions
  2. Set-top boxes
  3. Gaming consoles
  4. Media players
  5. Home theater systems

Its ability to seamlessly switch between multiple HDMI sources makes it ideal for applications where users need to connect different devices to a single display or audio/video receiver.

Detailed and Complete Alternative Models

  1. PI3HDMI3410: Similar to PI3HDMI336FBE but with 10 HDMI input ports.
  2. PI3HDMI332: A lower-cost alternative with 2 HDMI input ports.
  3. PI3HDMI2310: A higher-performance version with support for HDMI 2.1 features.

These alternative models offer different configurations and features to cater to specific application requirements.

Word count: 537 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PI3HDMI336FBE en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of PI3HDMI336FBE in technical solutions:

  1. Q: What is PI3HDMI336FBE? A: PI3HDMI336FBE is a high-speed HDMI switch that allows multiple HDMI sources to be connected to a single HDMI display.

  2. Q: What are the key features of PI3HDMI336FBE? A: Some key features of PI3HDMI336FBE include support for HDMI 2.0b, 4K resolution at 60Hz, HDCP 2.2 content protection, and automatic input switching.

  3. Q: How many HDMI inputs does PI3HDMI336FBE support? A: PI3HDMI336FBE supports up to 3 HDMI inputs, allowing you to connect multiple devices such as gaming consoles, Blu-ray players, or set-top boxes.

  4. Q: Can PI3HDMI336FBE be used with older HDMI versions? A: Yes, PI3HDMI336FBE is backward compatible with previous HDMI versions, so it can work with devices using HDMI 1.4, 1.3, or earlier versions.

  5. Q: Does PI3HDMI336FBE require external power? A: Yes, PI3HDMI336FBE requires an external power supply to function properly. It typically operates on a 5V DC power source.

  6. Q: Can PI3HDMI336FBE support audio transmission? A: Yes, PI3HDMI336FBE supports audio transmission along with video signals, allowing you to enjoy both high-quality visuals and sound.

  7. Q: Is PI3HDMI336FBE compatible with different display resolutions? A: Yes, PI3HDMI336FBE supports various display resolutions, including 480p, 720p, 1080p, and 4K Ultra HD.

  8. Q: Does PI3HDMI336FBE support HDR (High Dynamic Range) content? A: Yes, PI3HDMI336FBE is capable of transmitting HDR content, providing enhanced color depth and contrast for a more immersive viewing experience.

  9. Q: Can PI3HDMI336FBE be controlled remotely? A: Yes, PI3HDMI336FBE can be controlled remotely using an infrared (IR) remote control or through the use of CEC (Consumer Electronics Control) commands.

  10. Q: What are some typical applications of PI3HDMI336FBE? A: PI3HDMI336FBE is commonly used in home theaters, conference rooms, gaming setups, and any other scenario where multiple HDMI sources need to be connected to a single display.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.