The XR16M2751IM48-F belongs to the category of integrated circuits (ICs).
This IC is commonly used in electronic devices for various applications, including communication systems, consumer electronics, and industrial equipment.
The XR16M2751IM48-F is available in a small form factor package, which ensures easy integration into different electronic devices.
This IC serves as a crucial component in electronic systems, enabling efficient data transmission, signal processing, and control functions.
The XR16M2751IM48-F is typically packaged in reels or trays, with a standard quantity of 250 units per reel/tray.
The XR16M2751IM48-F features the following pin configuration:
| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VCC | Power Supply Voltage | | 2 | GND | Ground | | 3 | TXD | Transmit Data | | 4 | RXD | Receive Data | | ... | ... | ... | | 48 | RESET | Reset Signal |
The XR16M2751IM48-F operates based on the UART communication protocol. It receives and transmits data asynchronously, allowing for reliable and efficient data transfer between devices. The IC incorporates various hardware features and error detection mechanisms to ensure accurate and secure data transmission.
The XR16M2751IM48-F finds extensive application in the following fields:
Communication Systems:
Consumer Electronics:
Industrial Equipment:
XR16M2750IM48-F
XR16M2752IM48-F
XR16M2753IM48-F
XR16M2754IM48-F
These alternative models provide similar functionality to the XR16M2751IM48-F, catering to different requirements and design constraints.
Word count: 570 words
Sure! Here are 10 common questions and answers related to the application of XR16M2751IM48-F in technical solutions:
Q1: What is XR16M2751IM48-F? A1: XR16M2751IM48-F is a specific model of microcontroller manufactured by a company called Exar. It is commonly used in various technical solutions.
Q2: What are the key features of XR16M2751IM48-F? A2: Some key features of XR16M2751IM48-F include high-performance UARTs, low power consumption, multiple operating modes, and support for various communication protocols.
Q3: What are the typical applications of XR16M2751IM48-F? A3: XR16M2751IM48-F is often used in applications such as industrial automation, embedded systems, IoT devices, robotics, and communication equipment.
Q4: How many UART channels does XR16M2751IM48-F support? A4: XR16M2751IM48-F supports up to 16 UART channels, making it suitable for applications that require multiple serial communication interfaces.
Q5: Can XR16M2751IM48-F be programmed using C/C++? A5: Yes, XR16M2751IM48-F can be programmed using C/C++ programming languages, along with other supported development tools and environments.
Q6: Does XR16M2751IM48-F have built-in memory? A6: Yes, XR16M2751IM48-F has an integrated flash memory that can be used for storing program code and data.
Q7: What voltage levels does XR16M2751IM48-F support? A7: XR16M2751IM48-F operates at a wide range of voltage levels, typically from 1.8V to 5.5V, making it compatible with various power supply configurations.
Q8: Can XR16M2751IM48-F communicate with other microcontrollers or devices? A8: Yes, XR16M2751IM48-F supports various communication protocols such as SPI, I2C, and GPIO, allowing it to communicate with other microcontrollers or external devices.
Q9: Is XR16M2751IM48-F suitable for low-power applications? A9: Yes, XR16M2751IM48-F is designed to be power-efficient and offers low-power modes, making it suitable for battery-powered or energy-conscious applications.
Q10: Are there any development tools available for XR16M2751IM48-F? A10: Yes, Exar provides development tools such as software libraries, programming tools, and documentation to assist in the development of applications using XR16M2751IM48-F.
Please note that the specific details and answers may vary depending on the manufacturer's documentation and specifications.