Consulte las especificaciones para obtener detalles del producto.
IDT23S05-1DCI
Overview
Category
IDT23S05-1DCI belongs to the category of integrated circuits (ICs).
Use
It is primarily used for signal processing and communication applications.
Characteristics
- High-speed data transmission
- Low power consumption
- Compact package size
- Wide operating temperature range
Package
The IDT23S05-1DCI comes in a small form factor package, typically a 16-pin dual in-line package (DIP).
Essence
The essence of IDT23S05-1DCI lies in its ability to efficiently process and transmit digital signals.
Packaging/Quantity
The IC is usually packaged in reels or tubes, with a typical quantity of 1000 units per reel/tube.
Specifications and Parameters
The following are the specifications and parameters of IDT23S05-1DCI:
- Supply Voltage: 3.3V
- Operating Temperature Range: -40°C to +85°C
- Data Rate: Up to 10 Mbps
- Number of Pins: 16
- Input/Output Logic Levels: CMOS/TTL compatible
Pin Configuration
The pin configuration of IDT23S05-1DCI is as follows:
Pin 1: VCC
Pin 2: GND
Pin 3: NC
Pin 4: NC
Pin 5: NC
Pin 6: NC
Pin 7: NC
Pin 8: NC
Pin 9: NC
Pin 10: NC
Pin 11: NC
Pin 12: NC
Pin 13: DATA IN
Pin 14: DATA OUT
Pin 15: CLK
Pin 16: ENABLE
Functional Characteristics
The IDT23S05-1DCI offers the following functional characteristics:
- Bi-directional data transmission
- Synchronous serial communication
- Built-in clock synchronization
- Enable/disable control for data transmission
Advantages and Disadvantages
Advantages: - High-speed data transmission capability - Low power consumption - Compact package size for space-constrained applications
Disadvantages: - Limited data rate compared to some other ICs in the same category - Requires external clock signal for proper operation
Applicable Range of Products
IDT23S05-1DCI is suitable for a wide range of products that require high-speed data transmission and low power consumption. It can be used in various communication systems, industrial automation, and consumer electronics.
Working Principles
The IDT23S05-1DCI operates based on synchronous serial communication principles. It receives data from the DATA IN pin, processes it internally, and transmits it through the DATA OUT pin. The CLK pin provides the necessary clock signal for synchronization.
Detailed Application Field Plans
The IDT23S05-1DCI can be applied in the following fields:
- Communication Systems: Used for data transmission between different modules or devices.
- Industrial Automation: Enables efficient communication between sensors, controllers, and actuators.
- Consumer Electronics: Facilitates data exchange between various components in electronic devices.
Detailed Alternative Models
Some alternative models to IDT23S05-1DCI include:
- IDT23S06-1DCI
- IDT23S07-1DCI
- IDT23S08-1DCI
- IDT23S09-1DCI
- IDT23S10-1DCI
These models offer similar functionality but may have different specifications and pin configurations.
5 Common Technical Questions and Answers
Q: What is the maximum data rate supported by IDT23S05-1DCI? A: The maximum data rate is up to 10 Mbps.
Q: Can I use IDT23S05-1DCI with a supply voltage of 5V? A: No, the recommended supply voltage is 3.3V.
Q: Does IDT23S05-1DCI require an external clock signal? A: Yes, it requires an external clock signal for proper operation.
Q: What is the operating temperature range of IDT23S05-1DCI? A: It can operate within a temperature range of -40°C to +85°C.
Q: How many pins does IDT23S05-1DCI have? A: It has a total of 16 pins.