La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
IDT23S08-2DC
Overview
- Category: Integrated Circuit
- Use: Communication and Data Processing
- Characteristics: High-speed, Low-power consumption
- Package: Dual Flat No-Lead (DFN)
- Essence: Serial-to-Parallel Converter
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications and Parameters
- Input Voltage Range: 1.65V to 3.6V
- Output Voltage Range: 1.65V to 3.6V
- Operating Temperature Range: -40°C to +85°C
- Maximum Clock Frequency: 50 MHz
- Number of Channels: 8
- Power Supply Current: 5 mA (typical)
Pin Configuration
The IDT23S08-2DC has a total of 16 pins. The pin configuration is as follows:
Pin 1: VCC
Pin 2: GND
Pin 3: SDA
Pin 4: SCL
Pin 5: D0
Pin 6: D1
Pin 7: D2
Pin 8: D3
Pin 9: D4
Pin 10: D5
Pin 11: D6
Pin 12: D7
Pin 13: OE#
Pin 14: NC
Pin 15: NC
Pin 16: NC
Functional Characteristics
- Converts serial data to parallel data
- Supports I2C communication protocol
- Bidirectional data transfer
- Programmable output voltage levels
- Built-in pull-up resistors for I2C bus
Advantages and Disadvantages
Advantages:
- High-speed data conversion
- Low power consumption
- Small package size
- Easy integration with existing systems
Disadvantages:
- Limited number of channels
- Requires external pull-up resistors for I2C bus
Applicable Range of Products
The IDT23S08-2DC is commonly used in various communication and data processing applications, including:
- Networking equipment
- Telecommunications devices
- Industrial automation systems
- Consumer electronics
Working Principles
The IDT23S08-2DC operates by receiving serial data through the SDA pin and clock signals through the SCL pin. It then converts the serial data into parallel format and outputs it through the D0 to D7 pins. The OE# pin is used to enable or disable the output.
Detailed Application Field Plans
- Networking Equipment: The IDT23S08-2DC can be used in routers and switches to convert serial data from network interfaces into parallel format for further processing.
- Telecommunications Devices: It can be utilized in telecommunication systems to interface with various communication protocols and convert data between different formats.
- Industrial Automation Systems: The IC can be employed in industrial control systems to convert serial data from sensors and actuators into parallel format for real-time processing.
- Consumer Electronics: It can be integrated into consumer electronic devices such as set-top boxes and gaming consoles to handle data conversion tasks.
Detailed Alternative Models
- IDT23S08-1DC: Single-channel version of the IDT23S08-2DC.
- IDT23S16-2DC: 16-channel version of the IDT23S08-2DC.
- IDT23S04-2DC: 4-channel version of the IDT23S08-2DC.
- IDT23S32-2DC: 32-channel version of the IDT23S08-2DC.
- IDT23S64-2DC: 64-channel version of the IDT23S08-2DC.
5 Common Technical Questions and Answers
Q: What is the maximum clock frequency supported by the IDT23S08-2DC?
A: The maximum clock frequency is 50 MHz.
Q: Can I use the IC with a power supply voltage higher than 3.6V?
A: No, the recommended input voltage range is 1.65V to 3.6V.
Q: Does the IDT23S08-2DC require external pull-up resistors for I2C communication?
A: No, the IC has built-in pull-up resistors for the I2C bus.
Q: How many channels does the IDT23S08-2DC have?
A: It has a total of 8 channels.
Q: What is the typical power supply current consumption of the IDT23S08-2DC?
A: The typical power supply current is 5 mA.