The EPM3128ATI100-10N belongs to the category of programmable logic devices (PLDs).
This product is primarily used in digital circuit design and implementation. It provides a flexible and customizable solution for various applications.
The EPM3128ATI100-10N is available in a compact and durable package, ensuring easy handling and protection during transportation and installation.
The essence of this product lies in its ability to provide a flexible and efficient solution for digital circuit design, enabling users to implement complex functionalities with ease.
The EPM3128ATI100-10N is typically packaged individually and is available in various quantities depending on customer requirements.
The EPM3128ATI100-10N has a total of 100 pins, each serving a specific purpose in the circuit design. The detailed pin configuration is as follows:
(Pin Number) - (Pin Name) - (Function) 1 - VCCIO - Power Supply Voltage for I/O Pins 2 - GND - Ground 3 - TCK - Test Clock Input 4 - TMS - Test Mode Select 5 - TDI - Test Data Input 6 - TDO - Test Data Output 7 - nTRST - Test Reset Input 8 - CONF_DONE - Configuration Done Output 9 - nSTATUS - Status Output 10 - JTAGEN - JTAG Enable Input ... (continued)
The EPM3128ATI100-10N operates based on the principles of programmable logic. It consists of configurable logic blocks (CLBs), interconnect resources, and input/output blocks (IOBs). The CLBs can be programmed to perform specific functions using a hardware description language (HDL) or a schematic editor. The interconnect resources allow for the connection between different CLBs, enabling the desired circuit functionality. The IOBs provide the interface between the PLD and external devices.
The EPM3128ATI100-10N finds applications in various fields, including:
Sure! Here are 10 common questions and answers related to the application of EPM3128ATI100-10N in technical solutions:
Q: What is EPM3128ATI100-10N? A: EPM3128ATI100-10N is a specific model of programmable logic device (PLD) manufactured by Intel.
Q: What are the key features of EPM3128ATI100-10N? A: Some key features include 3,000 usable gates, 128 macrocells, 128 inputs/outputs, and a maximum operating frequency of 100 MHz.
Q: How can EPM3128ATI100-10N be used in technical solutions? A: EPM3128ATI100-10N can be used for various applications such as digital signal processing, control systems, data acquisition, and communication interfaces.
Q: What programming languages are supported for EPM3128ATI100-10N? A: EPM3128ATI100-10N can be programmed using Hardware Description Languages (HDLs) like VHDL or Verilog.
Q: Can EPM3128ATI100-10N be reprogrammed after initial configuration? A: No, EPM3128ATI100-10N is a one-time programmable device and cannot be reprogrammed once configured.
Q: What is the power supply requirement for EPM3128ATI100-10N? A: EPM3128ATI100-10N requires a single power supply voltage of 3.3V.
Q: Are there any temperature limitations for EPM3128ATI100-10N? A: Yes, the operating temperature range for EPM3128ATI100-10N is typically between 0°C and 70°C.
Q: Can EPM3128ATI100-10N interface with other digital components or devices? A: Yes, EPM3128ATI100-10N can interface with other digital components through its input/output pins.
Q: Is there any specific software required to program EPM3128ATI100-10N? A: Yes, you will need a compatible programming software like Intel Quartus Prime to program EPM3128ATI100-10N.
Q: Are there any development boards available for EPM3128ATI100-10N? A: Yes, Intel provides development boards that are specifically designed for programming and testing EPM3128ATI100-10N.
Please note that the answers provided here are general and may vary depending on the specific requirements and use cases of your technical solution.