Intersil
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
X9319UP8
Ver Detalle Hojas de datos

X9319UP8

Product Overview

  • Category: Electronic Component
  • Use: Digital Potentiometer
  • Characteristics: Programmable, Non-volatile, 100 Taps
  • Package: 8-pin SOIC
  • Essence: Provides digital control of resistance in electronic circuits
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Resistance Range: 0 to 10kΩ
  • Resolution: 100 taps
  • End-to-End Resistance Tolerance: ±20%
  • Operating Voltage: 2.7V to 5.5V
  • Temperature Range: -40°C to +85°C
  • Interface: Serial (3-wire)
  • Non-volatile Memory: Yes
  • Wiper Current: 1mA (maximum)

Detailed Pin Configuration

The X9319UP8 has a total of 8 pins:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. CS: Chip select input for serial communication
  4. SDA: Serial data input/output
  5. SCL: Serial clock input
  6. H/L: High/Low logic level input for programming mode selection
  7. A1: Address bit 1 for device addressing
  8. A0: Address bit 0 for device addressing

Functional Features

  • Programmable digital potentiometer with non-volatile memory
  • Allows precise digital control of resistance in electronic circuits
  • Offers 100 discrete resistance steps for fine adjustment
  • Supports low-power operation with a wide operating voltage range
  • Serial interface enables easy integration into various systems
  • Non-volatile memory retains wiper position during power-off cycles

Advantages and Disadvantages

Advantages

  • Precise and reliable resistance control
  • Non-volatile memory ensures settings are retained
  • Compact package for space-constrained applications
  • Low power consumption
  • Easy integration with serial interface

Disadvantages

  • Limited resolution compared to some higher-end models
  • End-to-end resistance tolerance may impact precision in certain applications

Working Principles

The X9319UP8 is based on the concept of a digital potentiometer. It consists of a resistive element divided into 100 discrete taps, which can be digitally controlled using the provided serial interface. The wiper position determines the effective resistance between the wiper terminal and the other end terminals. The non-volatile memory ensures that the wiper position is retained even when power is removed.

Detailed Application Field Plans

The X9319UP8 finds applications in various electronic systems where precise resistance control is required. Some potential application fields include:

  1. Audio Systems: Fine-tuning volume control circuits
  2. Industrial Automation: Calibration and adjustment of sensor circuits
  3. Test and Measurement Equipment: Programmable resistance loads
  4. Communication Systems: Signal conditioning and impedance matching circuits
  5. Automotive Electronics: Control of motor speed and lighting intensity

Detailed and Complete Alternative Models

  1. X9319WP8: Similar specifications but with a different package (8-pin DIP)
  2. X9320UP8: Higher resolution (256 taps) with similar characteristics and package
  3. X9C103S8: Lower resolution (10 taps) but with smaller package (8-pin SOIC)

These alternative models offer different trade-offs in terms of resolution, package size, and pin configuration, allowing users to choose the most suitable option for their specific requirements.

Word count: 399 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de X9319UP8 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of X9319UP8 in technical solutions:

  1. Q: What is X9319UP8? A: X9319UP8 is a digitally controlled potentiometer (DCP) integrated circuit that can be used for various applications requiring variable resistance.

  2. Q: What is the purpose of using X9319UP8 in technical solutions? A: X9319UP8 can be used to replace mechanical potentiometers, allowing for digital control of resistance in electronic circuits or systems.

  3. Q: How does X9319UP8 work? A: X9319UP8 consists of a resistor array and a digital-to-analog converter (DAC). The resistance value can be adjusted by sending digital control signals to the DAC.

  4. Q: What are the key features of X9319UP8? A: Some key features of X9319UP8 include low power consumption, non-volatile memory, small package size, and high resolution.

  5. Q: Can X9319UP8 be used in audio applications? A: Yes, X9319UP8 can be used in audio applications such as volume control or tone adjustment, providing precise and reliable resistance adjustments.

  6. Q: Is X9319UP8 compatible with microcontrollers or digital interfaces? A: Yes, X9319UP8 can be easily interfaced with microcontrollers or digital interfaces using standard communication protocols like I2C or SPI.

  7. Q: Can X9319UP8 be used in industrial automation systems? A: Absolutely, X9319UP8 can be employed in industrial automation systems for tasks like calibration, sensor trimming, or setting reference voltages.

  8. Q: Does X9319UP8 require external power supply? A: Yes, X9319UP8 requires an external power supply typically ranging from 2.7V to 5.5V, depending on the specific application requirements.

  9. Q: Can X9319UP8 be used in automotive electronics? A: Yes, X9319UP8 is suitable for automotive applications such as climate control, lighting control, or motor speed adjustment.

  10. Q: Are there any limitations or considerations when using X9319UP8? A: Some considerations include the maximum resistance value, temperature range, and the need for proper grounding and decoupling techniques.

Please note that these questions and answers are general and may vary depending on the specific application and requirements.