Maxim Integrated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MAX5934AEEE+T
Ver Detalle Hojas de datos

MAX5934AEEE+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: 16-QSOP
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Output Current: Up to 1.5A
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Quiescent Current: 50µA (typical)

Pin Configuration

The MAX5934AEEE+T has a 16-pin QSOP package with the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. SS/TR: Soft-Start/Tracking Pin
  6. VOUT: Output Voltage
  7. PGND: Power Ground
  8. PGND: Power Ground
  9. PGND: Power Ground
  10. PGND: Power Ground
  11. PGND: Power Ground
  12. PGND: Power Ground
  13. PGND: Power Ground
  14. PGND: Power Ground
  15. PGND: Power Ground
  16. PGND: Power Ground

Functional Features

  • High efficiency voltage regulation for power management applications.
  • Wide input voltage range allows for versatile usage.
  • Low quiescent current minimizes power consumption.
  • Soft-start and tracking feature for smooth power-up and operation.

Advantages and Disadvantages

Advantages: - High efficiency operation saves energy. - Wide input voltage range provides flexibility. - Low quiescent current reduces power consumption. - Soft-start feature ensures smooth power-up.

Disadvantages: - Limited output current capacity (up to 1.5A). - Temperature range limited to -40°C to +85°C.

Working Principles

The MAX5934AEEE+T is a voltage regulator IC that efficiently converts an input voltage within the range of 4.5V to 5.5V to a regulated output voltage between 0.8V and 3.6V. It achieves high efficiency through its internal circuitry, minimizing power losses during conversion. The soft-start feature allows for gradual ramp-up of the output voltage, preventing sudden surges. The feedback pin ensures accurate regulation by continuously monitoring the output voltage and adjusting the internal circuitry accordingly.

Detailed Application Field Plans

The MAX5934AEEE+T is commonly used in various power management applications, including but not limited to:

  1. Portable electronic devices
  2. Battery-powered systems
  3. IoT devices
  4. Embedded systems
  5. Industrial automation

Its wide input voltage range and high efficiency make it suitable for a diverse range of applications where efficient power conversion is required.

Detailed and Complete Alternative Models

  1. MAX5935AEEE+T: Similar specifications with enhanced output current capacity of up to 2A.
  2. MAX5936AEEE+T: Higher input voltage range of 4.5V to 16V with similar output characteristics.
  3. MAX5937AEEE+T: Lower quiescent current of 25µA with comparable specifications.

These alternative models offer variations in performance and features while maintaining compatibility with the MAX5934AEEE+T's pin configuration and package.

Word count: 409 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MAX5934AEEE+T en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MAX5934AEEE+T in technical solutions:

  1. Q: What is the MAX5934AEEE+T? A: The MAX5934AEEE+T is a power-over-Ethernet (PoE) controller designed for use in network devices that require both data and power over an Ethernet cable.

  2. Q: What is the maximum power output of the MAX5934AEEE+T? A: The MAX5934AEEE+T can deliver up to 15.4 watts of power to a PoE-enabled device.

  3. Q: Can the MAX5934AEEE+T be used with any Ethernet switch? A: Yes, the MAX5934AEEE+T is compatible with standard Ethernet switches that support the IEEE 802.3af PoE standard.

  4. Q: How does the MAX5934AEEE+T detect if a device is PoE-compatible? A: The MAX5934AEEE+T uses a detection algorithm called "signature detection" to determine if a connected device is PoE-compatible.

  5. Q: Can the MAX5934AEEE+T provide power to multiple devices simultaneously? A: Yes, the MAX5934AEEE+T supports multi-port operation and can provide power to multiple PoE-enabled devices at the same time.

  6. Q: Is the MAX5934AEEE+T suitable for outdoor applications? A: No, the MAX5934AEEE+T is not designed for outdoor use as it does not have the necessary protection against environmental factors.

  7. Q: Does the MAX5934AEEE+T support power management features? A: Yes, the MAX5934AEEE+T includes various power management features such as overcurrent protection, thermal shutdown, and under-voltage lockout.

  8. Q: What is the input voltage range for the MAX5934AEEE+T? A: The MAX5934AEEE+T operates with an input voltage range of 36V to 57V.

  9. Q: Can the MAX5934AEEE+T be used in non-PoE applications? A: Yes, the MAX5934AEEE+T can also be used in non-PoE applications by disabling the PoE functionality.

  10. Q: Are there any evaluation boards or reference designs available for the MAX5934AEEE+T? A: Yes, Maxim Integrated provides evaluation kits and reference designs that can help developers quickly prototype and implement the MAX5934AEEE+T in their applications.

Please note that these answers are general and may vary depending on specific application requirements and the manufacturer's documentation.