MAX6784TCC+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Voltage Reference
• Characteristics: High precision, low dropout voltage, low quiescent current
• Package: TDFN-8 (Thin Dual Flat No-Lead)
• Essence: Provides a stable and accurate voltage reference for various applications
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Options: 1.25V, 2.048V, 2.5V, 3.0V, 3.3V, 4.096V, 5.0V
• Initial Accuracy: ±0.05%
• Temperature Coefficient: ±50ppm/°C
• Quiescent Current: 45µA (typical)
• Dropout Voltage: 200mV at 100mA load current
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX6784TCC+T has the following pin configuration:

```

---

| | --| VOUT | --| GND | --| NC | --| VIN | --| NC | --| NC | --| NC | --| SHDN | |___________| ```

Functional Features

• High precision voltage reference
• Low dropout voltage ensures efficient operation
• Low quiescent current for power-saving applications
• Shutdown mode (SHDN) for further power reduction
• Wide input voltage range allows flexibility in usage
• Multiple output voltage options for different requirements

Advantages and Disadvantages

Advantages

• High accuracy and stability
• Low power consumption
• Small package size for space-constrained designs
• Shutdown mode for power-saving applications

Disadvantages

• Limited output voltage options
• Not suitable for high current applications

Working Principles

The MAX6784TCC+T is a precision voltage reference IC that generates a stable and accurate reference voltage. It operates by comparing the input voltage (VIN) to an internal reference voltage and providing a regulated output voltage (VOUT). The device maintains its accuracy over a wide range of operating conditions, making it suitable for various applications.

Detailed Application Field Plans

The MAX6784TCC+T can be used in a wide range of applications, including but not limited to:

1. Battery-powered devices: Provides a stable reference voltage for battery monitoring circuits.
2. Data acquisition systems: Ensures accurate measurements by providing a precise voltage reference.
3. Industrial control systems: Used as a voltage reference for analog-to-digital converters (ADCs) and digital-to-analog converters (DACs).
4. Portable medical devices: Provides a stable voltage reference for accurate sensor readings.
5. Automotive electronics: Used in various automotive systems requiring precise voltage references.

Detailed and Complete Alternative Models

1. MAX6190 - Precision Voltage Reference with 1.25V Output
2. LT6656 - Ultra-Stable Voltage Reference with Wide Input Voltage Range
3. LM4040 - Micropower Shunt Voltage Reference with Low Dropout Voltage

These alternative models offer similar functionality and can be considered as alternatives to the MAX6784TCC+T based on specific application requirements.

In conclusion, the MAX6784TCC+T is a high-precision voltage reference IC with low dropout voltage and low quiescent current. It provides a stable and accurate reference voltage for various applications. While it has some limitations, it offers several advantages such as high accuracy, low power consumption, and a small package size. The detailed pin configuration, functional features, working principles, application field plans, and alternative models provide a comprehensive understanding of the MAX6784TCC+T.