Consulte las especificaciones para obtener detalles del producto.
MAPLAD7.5KP20CA
Introduction
The MAPLAD7.5KP20CA belongs to the category of transient voltage suppressor (TVS) diodes and is designed for use in various electronic applications to protect sensitive components from voltage transients. This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the MAPLAD7.5KP20CA.
Basic Information Overview
- Category: Transient Voltage Suppressor (TVS) Diode
- Use: Protection against voltage transients in electronic circuits
- Characteristics: High surge capability, low clamping voltage, fast response time
- Package: Axial leaded, DO-201AD
- Essence: Silicon TVS Diode
- Packaging/Quantity: Available in tape and reel packaging, quantity varies by manufacturer
Specifications
- Peak Pulse Power: 7.5kW
- Standoff Voltage: 20V
- Breakdown Voltage Range: 22.2V - 24.4V
- Maximum Clamping Voltage: 32.4V at 100A
- Operating Temperature Range: -55°C to +175°C
- Storage Temperature Range: -55°C to +175°C
Detailed Pin Configuration
The MAPLAD7.5KP20CA typically has two axial leads with a standard cathode marking for easy identification.
Functional Features
- Fast response time to transient voltage events
- Low clamping voltage to protect downstream components
- High surge capability for reliable protection
Advantages and Disadvantages
Advantages
- Effective protection against voltage transients
- Fast response time
- Wide operating temperature range
Disadvantages
- Higher cost compared to traditional diodes
- Requires careful consideration of reverse leakage current in certain applications
Working Principles
The MAPLAD7.5KP20CA operates by diverting excessive transient currents away from sensitive components, thereby limiting the voltage across the protected circuit. When a transient voltage event occurs, the diode rapidly switches into its low impedance state, effectively shunting the excess energy to ground.
Detailed Application Field Plans
The MAPLAD7.5KP20CA is commonly used in various applications including: - Power supply units - Industrial equipment - Automotive electronics - Telecommunication systems - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models to the MAPLAD7.5KP20CA include: - SMAJ20A: 400W, 20V TVS Diode - P6KE20CA: 600W, 20V TVS Diode - 1.5KE20CA: 1500W, 20V TVS Diode - SMCJ20A: 1500W, 20V TVS Diode
In conclusion, the MAPLAD7.5KP20CA is a high-performance TVS diode offering robust protection against voltage transients in a wide range of electronic applications. Its fast response time, low clamping voltage, and high surge capability make it a reliable choice for safeguarding sensitive components.
[Word count: 464]
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MAPLAD7.5KP20CA en soluciones técnicas
What is MAPLAD7.5KP20CA?
- MAPLAD7.5KP20CA is a type of transient voltage suppressor diode designed to protect sensitive electronic components from voltage spikes and transients.
What are the key features of MAPLAD7.5KP20CA?
- The key features include a peak pulse power of 7.5kW, a breakdown voltage of 20V, low clamping voltage, and fast response time.
Where can MAPLAD7.5KP20CA be used in technical solutions?
- MAPLAD7.5KP20CA can be used in various technical solutions such as power supplies, automotive electronics, industrial equipment, and telecommunications systems.
How does MAPLAD7.5KP20CA protect electronic components?
- MAPLAD7.5KP20CA protects electronic components by diverting excessive voltage and current away from sensitive circuits, thereby preventing damage from voltage surges.
What are the typical applications for MAPLAD7.5KP20CA?
- Typical applications include surge protection in power lines, protection of communication ports, and safeguarding of sensitive semiconductor devices.
What are the operating conditions for MAPLAD7.5KP20CA?
- MAPLAD7.5KP20CA operates within a temperature range of -55°C to +175°C and can handle high transient currents without degradation.
Are there any recommended circuit designs when using MAPLAD7.5KP20CA?
- Yes, it is recommended to incorporate proper PCB layout and grounding techniques to maximize the effectiveness of MAPLAD7.5KP20CA in protecting electronic circuits.
Can MAPLAD7.5KP20CA be used in high-frequency applications?
- Yes, MAPLAD7.5KP20CA can be used in high-frequency applications due to its fast response time and low capacitance.
What certifications or standards does MAPLAD7.5KP20CA comply with?
- MAPLAD7.5KP20CA complies with industry standards such as RoHS and may also meet specific automotive or industrial certifications.
Where can I find detailed specifications and application notes for MAPLAD7.5KP20CA?
- Detailed specifications and application notes for MAPLAD7.5KP20CA can be found on the manufacturer's website or in the product datasheet.