74LVT374PW,118

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Flip-Flop / Latch
• Characteristics: Low Voltage, High-Speed CMOS Octal D-Type Flip-Flop with 3-State Outputs
• Package: TSSOP (Thin Shrink Small Outline Package)
• Essence: This IC is designed to store and transfer data in electronic circuits.
• Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

• Supply Voltage Range: 1.2V to 3.6V
• Input Voltage Range: 0V to VCC
• Output Voltage Range: 0V to VCC
• Operating Temperature Range: -40°C to +85°C
• Logic Family: LVT (Low Voltage TTL)
• Number of Flip-Flops: 8
• Output Type: 3-State

Detailed Pin Configuration

1. GND (Ground)
2. D0 (Data Input 0)
3. D1 (Data Input 1)
4. D2 (Data Input 2)
5. D3 (Data Input 3)
6. D4 (Data Input 4)
7. D5 (Data Input 5)
8. D6 (Data Input 6)
9. D7 (Data Input 7)
10. OE (Output Enable)
11. CP (Clock Pulse)
12. MR (Master Reset)
13. Q0 (Flip-Flop Output 0)
14. Q1 (Flip-Flop Output 1)
15. Q2 (Flip-Flop Output 2)
16. Q3 (Flip-Flop Output 3)
17. Q4 (Flip-Flop Output 4)
18. Q5 (Flip-Flop Output 5)
19. Q6 (Flip-Flop Output 6)
20. Q7 (Flip-Flop Output 7)
21. VCC (Supply Voltage)

Functional Features

• High-Speed Operation: The 74LVT374PW,118 is capable of operating at high clock frequencies, making it suitable for applications requiring fast data transfer.
• 3-State Outputs: The IC has 3-state outputs, allowing multiple devices to share a common bus without interfering with each other's signals.
• Low Power Consumption: It operates at low voltage levels, resulting in reduced power consumption compared to traditional TTL logic.

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient data transfer. - 3-state outputs facilitate bus sharing in complex systems. - Low power consumption helps conserve energy.

Disadvantages: - Limited voltage range (1.2V to 3.6V) may not be suitable for all applications. - TSSOP package may require careful handling during assembly.

Working Principles

The 74LVT374PW,118 is an octal D-type flip-flop with 3-state outputs. It stores data based on the clock pulse input (CP) and transfers it to the output pins (Q0-Q7) when the output enable (OE) signal is active. The master reset (MR) pin resets all flip-flops to a known state when activated. The IC operates using low voltage CMOS technology, providing high-speed performance while consuming minimal power.

Detailed Application Field Plans

• Data Storage and Transfer: The 74LVT374PW,118 can be used in various digital systems where data needs to be stored temporarily or transferred between different components.
• Address Decoding: It can be employed in address decoding circuits to select specific memory locations or peripheral devices.
• Bus Interface: The 3-state outputs make it suitable for connecting multiple devices to a shared bus, such as in microprocessor-based systems.

Detailed and Complete Alternative Models

• 74LVC374APW,118: Similar to 74LVT374PW,118 but operates at a wider voltage range (1.65V to 3.6V).
• 74HC374PW,118: High-speed CMOS alternative with TTL-compatible inputs and outputs.
• 74ACT374SCX: Advanced CMOS version with faster switching speeds and higher noise immunity.

(Note: The above alternative models are just examples and not an exhaustive list.)

This entry provides comprehensive information about the 74LVT374PW,118 integrated circuit. It covers its basic details, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.