Consulte las especificaciones para obtener detalles del producto.
PCA9554BPWJ
Product Overview
Category: Integrated Circuit (IC)
Use: The PCA9554BPWJ is a 16-bit I2C-bus and SMBus I/O expander designed for various applications that require additional input/output (I/O) ports. It provides general-purpose parallel input/output expansion for most microcontroller families.
Characteristics: - 16 programmable I/O pins - I2C-bus/SMBus interface compatibility - Low standby current consumption - Noise filter on SDA/SCL inputs - Internal power-on reset - Polarity inversion register - Active-low interrupt output - 5V tolerant I/O ports - ESD protection exceeds 2000V HBM per JESD22-A114, 200V MM per JESD22-A115, and 1000V CDM per JESD22-C101
Package: TSSOP (Thin Shrink Small Outline Package)
Essence: The PCA9554BPWJ is an integrated circuit that expands the number of input/output ports available to microcontrollers. It allows for easy integration of additional I/O functionality in various applications.
Packaging/Quantity: The PCA9554BPWJ is typically sold in reels or tubes, with each reel/tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the supplier.
Specifications
- Supply Voltage: 2.3V to 5.5V
- Input/Output Voltage: 0V to VDD
- Operating Temperature Range: -40°C to +85°C
- I2C-bus Frequency: Up to 400 kHz
Pin Configuration
The PCA9554BPWJ has a total of 24 pins. The pin configuration is as follows:
```
| | | 1 2 3 | |_______________| | | | 4 5 6 | |_______________| | | | 7 8 9 | |_______________| | | | 10 11 12 | |_______________| | | | 13 14 15 | |_______________| | | | 16 17 18 | |_______________| | | | 19 20 21 | |_______________| | | | 22 23 24 | |_______________| ```
Functional Features
- I2C-bus/SMBus interface compatibility allows for easy integration with microcontrollers.
- Noise filter on SDA/SCL inputs helps to improve signal integrity in noisy environments.
- Polarity inversion register enables the inversion of input/output logic levels.
- Active-low interrupt output provides a convenient way to detect changes on the I/O ports.
- 5V tolerant I/O ports allow for direct interfacing with devices operating at higher voltages.
- ESD protection ensures robustness against electrostatic discharge.
Advantages and Disadvantages
Advantages: - Provides additional I/O ports for microcontroller-based systems. - Easy integration with microcontrollers through the I2C-bus/SMBus interface. - Low standby current consumption helps to minimize power consumption. - Noise filter improves signal integrity in noisy environments. - ESD protection ensures reliability in harsh operating conditions.
Disadvantages: - Limited to 16 programmable I/O pins, which may not be sufficient for certain applications requiring a larger number of I/O ports. - Requires I2C-bus/SMBus interface support from the microcontroller.
Working Principles
The PCA9554BPWJ operates by communicating with a microcontroller through the I2C-bus or SMBus interface. The microcontroller sends commands and data to the PCA9554BPWJ, which in turn controls the state of its 16 programmable I/O pins. The I/O pins can be configured as inputs or outputs, allowing for various applications that require additional I/O functionality.
Detailed Application Field Plans
The PCA9554BPWJ finds applications in a wide range of fields, including but not limited to: 1. Industrial automation: Control and monitoring of sensors, actuators, and other devices. 2. Home automation: Integration with smart home systems for controlling lights, appliances, and security systems. 3. Automotive electronics: Expansion of I/O ports for automotive control units and infotainment systems. 4. Internet of Things (IoT): Enabling connectivity and control of IoT devices through additional I/O ports. 5. Robotics: Integration with robotic systems for controlling motors, sensors, and peripheral devices.
Detailed
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PCA9554BPWJ en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of PCA9554BPWJ:
Q: What is PCA9554BPWJ? A: PCA9554BPWJ is a 16-bit I/O expander with an I2C interface, commonly used in technical solutions for expanding the number of available GPIO pins.
Q: How does PCA9554BPWJ communicate with a microcontroller? A: PCA9554BPWJ communicates with a microcontroller using the I2C protocol, allowing for easy integration into various systems.
Q: What is the maximum voltage that PCA9554BPWJ can handle? A: PCA9554BPWJ can handle a maximum voltage of 5.5V.
Q: Can PCA9554BPWJ be used as both input and output pins? A: Yes, PCA9554BPWJ can be configured as either input or output pins individually, providing flexibility in different applications.
Q: How many GPIO pins does PCA9554BPWJ provide? A: PCA9554BPWJ provides 16 GPIO pins, which can be independently controlled.
Q: Is PCA9554BPWJ suitable for low-power applications? A: Yes, PCA9554BPWJ has a low standby current consumption, making it suitable for low-power applications.
Q: Can PCA9554BPWJ be cascaded to expand the number of GPIO pins further? A: Yes, multiple PCA9554BPWJ devices can be cascaded together using the I2C bus, allowing for expansion beyond the initial 16 GPIO pins.
Q: Does PCA9554BPWJ have built-in pull-up resistors? A: Yes, PCA9554BPWJ has built-in programmable pull-up resistors for each GPIO pin.
Q: Can PCA9554BPWJ handle interrupts? A: Yes, PCA9554BPWJ supports interrupt functionality, allowing for efficient event-driven designs.
Q: What are some common applications of PCA9554BPWJ? A: PCA9554BPWJ is commonly used in applications such as LED control, keypad scanning, sensor interfacing, and general-purpose I/O expansion.
Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution.