ON Semiconductor
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
74VHC374MTC
Ver Detalle Hojas de datos

Encyclopedia Entry: 74VHC374MTC

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Flip-Flop / Latch
  • Characteristics: High-Speed, Low-Power, Octal D-Type Flip-Flop with 3-State Outputs
  • Package: TSSOP-20
  • Essence: This IC is designed to store and transfer data in digital systems. It provides eight flip-flops with 3-state outputs, making it suitable for various applications.
  • Packaging/Quantity: The 74VHC374MTC is typically sold in reels containing 2,500 units.

Specifications

  • Supply Voltage: 2.0V to 5.5V
  • Input Voltage Levels: High: 0.7 x Vcc, Low: 0.3 x Vcc
  • Output Voltage Levels: High: Vcc - 0.5V, Low: 0.5V
  • Propagation Delay: 4.3 ns (typical) at 5V, 20 pF load
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 74VHC374MTC has a total of 20 pins, which are assigned as follows:

  1. Pin 1: Output Enable (OE)
  2. Pin 2: Data Input (D0)
  3. Pin 3: Data Input (D1)
  4. Pin 4: Data Input (D2)
  5. Pin 5: Data Input (D3)
  6. Pin 6: Data Input (D4)
  7. Pin 7: Data Input (D5)
  8. Pin 8: Data Input (D6)
  9. Pin 9: Data Input (D7)
  10. Pin 10: Ground (GND)
  11. Pin 11: Clock Input (CP)
  12. Pin 12: Clock Enable (CE)
  13. Pin 13: Output (Q0)
  14. Pin 14: Output (Q1)
  15. Pin 15: Output (Q2)
  16. Pin 16: Output (Q3)
  17. Pin 17: Output (Q4)
  18. Pin 18: Output (Q5)
  19. Pin 19: Output (Q6)
  20. Pin 20: Output (Q7)

Functional Features

  • The 74VHC374MTC is a positive-edge triggered flip-flop/latch with 3-state outputs.
  • It can store and transfer data on the rising edge of the clock signal.
  • The output enable pin allows the outputs to be put in a high-impedance state when not needed.
  • This IC operates at high speed while consuming low power, making it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient data transfer. - Low power consumption extends battery life in portable applications. - 3-state outputs provide flexibility in connecting multiple devices. - Wide operating voltage range allows compatibility with various systems.

Disadvantages: - Limited number of flip-flops may restrict its use in complex systems. - TSSOP package may require careful handling during assembly.

Working Principles

The 74VHC374MTC operates based on positive-edge triggering. When the clock input (CP) receives a rising edge, the data present at the D0-D7 inputs is latched and stored in the corresponding flip-flops. The stored data is then available at the Q0-Q7 outputs. The output enable (OE) pin controls whether the outputs are active or in a high-impedance state.

Detailed Application Field Plans

The 74VHC374MTC can be used in various digital systems where data storage and transfer are required. Some potential application fields include: - Microcontrollers and microprocessors - Data communication systems - Memory modules - Industrial automation - Automotive electronics

Detailed and Complete Alternative Models

  • 74HC374: Similar to 74VHC374MTC but operates at a higher voltage range (2V to 6V).
  • 74LS374: Low-power Schottky version with similar functionality but slower speed.
  • SN74LV374A: Low-voltage CMOS variant with comparable characteristics.

These alternative models offer similar functionality and can be considered based on specific system requirements.

In conclusion, the 74VHC374MTC is a high-speed, low-power octal D-type flip-flop IC with 3-state outputs. Its compact TSSOP-20 package and versatile features make it suitable for various digital applications. However, designers should consider alternative models depending on voltage requirements and specific system constraints.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de 74VHC374MTC en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of 74VHC374MTC in technical solutions:

  1. Q: What is the 74VHC374MTC? A: The 74VHC374MTC is a type of integrated circuit (IC) known as an octal D-type flip-flop with 3-state outputs.

  2. Q: What is the purpose of the 74VHC374MTC? A: The purpose of this IC is to store and manipulate digital data in electronic circuits.

  3. Q: What voltage levels does the 74VHC374MTC support? A: It supports a wide range of voltage levels, typically between 2V and 5.5V.

  4. Q: How many flip-flops are there in the 74VHC374MTC? A: There are 8 flip-flops in total, making it an octal (8-bit) device.

  5. Q: What are the 3-state outputs in the 74VHC374MTC used for? A: The 3-state outputs allow the IC to be connected to a bus or shared line, enabling multiple devices to drive the same line without interference.

  6. Q: Can the 74VHC374MTC be used in both synchronous and asynchronous applications? A: Yes, it can be used in both synchronous and asynchronous applications depending on the specific requirements of the circuit.

  7. Q: What is the maximum clock frequency supported by the 74VHC374MTC? A: The maximum clock frequency is typically around 200 MHz, but it may vary depending on the specific operating conditions.

  8. Q: Does the 74VHC374MTC have any built-in protection features? A: Yes, it has built-in protection against electrostatic discharge (ESD) and excessive power dissipation.

  9. Q: Can the 74VHC374MTC be cascaded to increase the number of flip-flops? A: Yes, multiple 74VHC374MTC ICs can be cascaded together to increase the number of flip-flops in a circuit.

  10. Q: What are some common applications of the 74VHC374MTC? A: Some common applications include data storage, address decoding, bus interfacing, and general-purpose digital logic circuits.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements of the 74VHC374MTC.