Consulte las especificaciones para obtener detalles del producto.
1N4247 Diode
Product Overview
Category:
The 1N4247 is a silicon rectifier diode.
Use:
It is commonly used in power supply circuits, voltage regulation, and signal demodulation.
Characteristics:
- Forward Voltage Drop: 1V
- Reverse Voltage: 1000V
- Maximum Average Forward Current: 12A
- Package Type: DO-203AB
- Packaging/Quantity: Bulk packaging, available in various quantities
Specifications:
- Peak Repetitive Reverse Voltage: 1000V
- Average Rectified Forward Current: 12A
- Non-Repetitive Peak Surge Current: 200A
- Operating Temperature Range: -65°C to +175°C
Detailed Pin Configuration
The 1N4247 diode has a standard DO-203AB package with two leads. The anode is connected to the positive terminal of the circuit, while the cathode is connected to the negative terminal.
Functional Features
The 1N4247 diode acts as a one-way valve for current flow, allowing current to pass in only one direction. It exhibits low forward voltage drop and high reverse voltage capability, making it suitable for high-power applications.
Advantages and Disadvantages
Advantages:
- High reverse voltage capability
- Low forward voltage drop
- Suitable for high-power applications
Disadvantages:
- Relatively large package size
- Limited to unidirectional current flow
Working Principles
The 1N4247 diode operates based on the principle of semiconductor junction behavior. When a positive voltage is applied to the anode with respect to the cathode, the diode conducts current. However, when the polarity is reversed, the diode blocks the current flow.
Detailed Application Field Plans
The 1N4247 diode finds extensive use in the following applications: - Power supply circuits - Voltage regulation - Signal demodulation - High-voltage rectification
Detailed and Complete Alternative Models
Some alternative models to the 1N4247 diode include: - 1N4007 - 1N5408 - 1N5819 - 1N5399
In conclusion, the 1N4247 diode is a versatile component widely used in power electronics and voltage regulation applications due to its high reverse voltage capability and low forward voltage drop.
[Word count: 330]
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de 1N4247 en soluciones técnicas
What is the 1N4247 diode used for?
- The 1N4247 diode is commonly used for general-purpose rectification and protection in electronic circuits.
What are the key specifications of the 1N4247 diode?
- The 1N4247 diode has a maximum repetitive peak reverse voltage of 1000V, a forward current of 3A, and a forward voltage drop of approximately 1.1V at 3A.
How is the 1N4247 diode typically connected in a circuit?
- The 1N4247 diode is often connected in series with a load to provide reverse polarity protection or in parallel with a relay coil to suppress voltage spikes.
Can the 1N4247 diode be used for high-voltage applications?
- Yes, the 1N4247 diode's high peak reverse voltage makes it suitable for use in high-voltage applications such as power supplies and inverters.
What are some common alternatives to the 1N4247 diode?
- Alternatives to the 1N4247 diode include the 1N4007, 1N5408, and UF4007 diodes, which have similar characteristics and can be used in its place depending on the specific application requirements.
Does the 1N4247 diode require a heat sink?
- For high-current applications or when operating near its maximum ratings, the 1N4247 diode may benefit from a heat sink to dissipate heat effectively.
Can the 1N4247 diode be used in fast-switching circuits?
- No, the 1N4247 diode is not designed for fast-switching applications due to its relatively slow recovery time.
What are the typical failure modes of the 1N4247 diode?
- Common failure modes of the 1N4247 diode include overcurrent damage, thermal runaway, and breakdown due to excessive reverse voltage.
Is the 1N4247 diode suitable for automotive applications?
- Yes, the 1N4247 diode can be used in automotive applications for rectification and transient voltage suppression.
Are there any special considerations when using the 1N4247 diode in high-temperature environments?
- When operating in high-temperature environments, proper thermal management should be considered to ensure the 1N4247 diode operates within its specified temperature limits.