STMicroelectronics
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TDA7572TR
Ver Detalle Hojas de datos

TDA7572TR

Product Overview

Category

TDA7572TR belongs to the category of integrated circuits (ICs).

Use

This product is primarily used in automotive audio systems.

Characteristics

  • High efficiency amplifier
  • Class-D amplifier technology
  • Low power consumption
  • Compact size
  • Thermal protection
  • Short-circuit protection

Package

TDA7572TR is available in a small outline package (SOP) with 27 pins.

Essence

The essence of TDA7572TR lies in its ability to provide high-quality audio amplification while consuming minimal power and offering thermal and short-circuit protection.

Packaging/Quantity

TDA7572TR is typically packaged in reels, with each reel containing a quantity of 250 units.

Specifications

  • Supply voltage: 6V to 18V
  • Output power: 4 x 25W (at 14.4V, 1kHz, 10% THD)
  • Total harmonic distortion: <0.5%
  • Signal-to-noise ratio: >90dB
  • Operating temperature range: -40°C to +105°C

Detailed Pin Configuration

  1. OUT1: Output channel 1
  2. GND: Ground
  3. VCC: Power supply voltage
  4. OUT2: Output channel 2
  5. OUT3: Output channel 3
  6. OUT4: Output channel 4
  7. IN1-: Negative input channel 1
  8. IN1+: Positive input channel 1
  9. IN2-: Negative input channel 2
  10. IN2+: Positive input channel 2
  11. IN3-: Negative input channel 3
  12. IN3+: Positive input channel 3
  13. IN4-: Negative input channel 4
  14. IN4+: Positive input channel 4
  15. MUTE: Mute control
  16. ST-BY: Standby control
  17. DIAG: Diagnostic output
  18. VCC: Power supply voltage
  19. GND: Ground
  20. VCC: Power supply voltage
  21. OUT4: Output channel 4
  22. OUT3: Output channel 3
  23. OUT2: Output channel 2
  24. OUT1: Output channel 1
  25. GND: Ground
  26. VCC: Power supply voltage
  27. DIAG: Diagnostic output

Functional Features

  • High efficiency conversion of input power to output audio signal
  • Four independent channels for stereo or multi-channel audio applications
  • Mute and standby control for power management
  • Diagnostic output for fault detection and protection

Advantages and Disadvantages

Advantages

  • High efficiency results in reduced power consumption
  • Compact size allows for easy integration into automotive audio systems
  • Thermal and short-circuit protection ensures product durability and safety
  • Four independent channels provide flexibility for various audio configurations

Disadvantages

  • Limited output power compared to some other amplifiers in the market
  • Requires external components for proper operation

Working Principles

TDA7572TR utilizes Class-D amplifier technology, which employs pulse width modulation (PWM) to convert the input audio signal into a high-frequency square wave. This square wave is then filtered and amplified to produce the desired audio output. The high efficiency of Class-D amplifiers is achieved by minimizing power dissipation during the amplification process.

Detailed Application Field Plans

TDA7572TR is specifically designed for automotive audio systems. It can be used in various applications such as car radios, car amplifiers, and car multimedia systems. Its compact size and low power consumption make it an ideal choice for integrating high-quality audio amplification into vehicles.

Detailed and Complete Alternative Models

  1. TDA7850: Similar to TDA7572TR, this IC is designed for automotive audio systems and offers higher output power.
  2. TDA7379: Another alternative for automotive audio applications, providing a different set of features and specifications.
  3. TDA7560: A versatile audio amplifier IC suitable for both automotive and home audio applications.

These alternative models offer different performance characteristics and may be chosen based on specific requirements and system design considerations.

Word count: 537 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TDA7572TR en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TDA7572TR in technical solutions:

  1. Q: What is TDA7572TR? A: TDA7572TR is a power amplifier integrated circuit (IC) designed for automotive audio applications.

  2. Q: What is the maximum output power of TDA7572TR? A: The maximum output power of TDA7572TR is typically 4 x 45 Watts into 4 Ohms at 14.4V supply voltage.

  3. Q: Can TDA7572TR operate with a single power supply? A: Yes, TDA7572TR can operate with a single power supply ranging from 6V to 18V.

  4. Q: Does TDA7572TR support bridge-tied load (BTL) configuration? A: Yes, TDA7572TR supports BTL configuration, allowing it to drive a speaker directly without an output coupling capacitor.

  5. Q: What is the input sensitivity of TDA7572TR? A: The input sensitivity of TDA7572TR is typically 0.5V RMS, making it compatible with various audio sources.

  6. Q: Does TDA7572TR have built-in protection features? A: Yes, TDA7572TR includes protection features such as thermal shutdown, overvoltage, and short-circuit protection.

  7. Q: Can TDA7572TR be used in other applications besides automotive audio? A: While TDA7572TR is primarily designed for automotive audio, it can also be used in other audio amplification applications.

  8. Q: What is the operating temperature range of TDA7572TR? A: The operating temperature range of TDA7572TR is typically -40°C to +105°C, making it suitable for automotive environments.

  9. Q: Does TDA7572TR require external components for operation? A: Yes, TDA7572TR requires external components such as capacitors, resistors, and inductors for proper operation.

  10. Q: Is TDA7572TR RoHS compliant? A: Yes, TDA7572TR is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.