Consulte las especificaciones para obtener detalles del producto.
Encyclopedia Entry: 74FCT162501ATPVCT
Product Overview
Category
The 74FCT162501ATPVCT belongs to the category of integrated circuits (ICs).
Use
This IC is commonly used in digital electronic systems for data storage and signal transmission purposes.
Characteristics
- High-speed operation
- Low power consumption
- Wide operating voltage range
- Compatibility with various logic families
- Robustness against noise and interference
Package
The 74FCT162501ATPVCT is typically available in a small outline package (SOP) or thin quad flat pack (TQFP) package.
Essence
This IC serves as a bidirectional buffer/line driver, providing high-performance signal amplification and isolation capabilities.
Packaging/Quantity
The 74FCT162501ATPVCT is usually packaged in reels or trays, containing multiple units per package. The exact quantity may vary depending on the supplier.
Specifications
- Supply Voltage: 2.0V to 5.5V
- Input/Output Voltage Range: 0V to VCC
- Operating Temperature Range: -40°C to +85°C
- Output Drive Capability: ±24mA
- Propagation Delay: <10ns
Detailed Pin Configuration
The 74FCT162501ATPVCT consists of 48 pins, each serving a specific function. Here is a detailed pin configuration:
- A1: Input/Output A1
- GND: Ground
- A2: Input/Output A2
- B1: Input/Output B1
- GND: Ground
- B2: Input/Output B2
- Y1: Output Y1
- GND: Ground
- Y2: Output Y2
- OE1: Output Enable 1
- GND: Ground
- OE2: Output Enable 2
- VCC: Power Supply
- B3: Input/Output B3
- GND: Ground
- B4: Input/Output B4
- A3: Input/Output A3
- GND: Ground
- A4: Input/Output A4
- Y3: Output Y3
- GND: Ground
- Y4: Output Y4
- OE3: Output Enable 3
- GND: Ground
- OE4: Output Enable 4
- VCC: Power Supply
- B5: Input/Output B5
- GND: Ground
- B6: Input/Output B6
- A5: Input/Output A5
- GND: Ground
- A6: Input/Output A6
- Y5: Output Y5
- GND: Ground
- Y6: Output Y6
- OE5: Output Enable 5
- GND: Ground
- OE6: Output Enable 6
- VCC: Power Supply
- B7: Input/Output B7
- GND: Ground
- B8: Input/Output B8
- A7: Input/Output A7
- GND: Ground
- A8: Input/Output A8
- Y7: Output Y7
- GND: Ground
- Y8: Output Y8
Functional Features
- Bidirectional data transmission
- High-speed signal amplification
- Output enable control for individual channels
- Wide operating voltage range for compatibility with various systems
- Robust noise immunity for reliable data transmission
Advantages and Disadvantages
Advantages
- High-speed operation allows for efficient data transfer.
- Low power consumption contributes to energy efficiency.
- Wide operating voltage range enables compatibility with different electronic systems.
- Robustness against noise and interference ensures reliable signal transmission.
Disadvantages
- Limited output drive capability may restrict usage in certain applications requiring higher current levels.
- The complexity of the pin configuration may require careful attention during circuit design and layout.
Working Principles
The 74FCT162501ATPVCT functions as a bidirectional buffer/line driver. It amplifies and isolates digital signals, allowing for bidirectional data transmission between different parts of a digital system. The output enable control feature enables selective activation or deactivation of individual channels, providing flexibility in signal routing.
Detailed Application Field Plans
The 74FCT162501ATPVCT finds applications in various digital electronic systems, including but not limited to: - Microprocessors and microcontrollers - Communication systems - Data storage devices - Industrial automation systems - Automotive electronics
Detailed
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de 74FCT162501ATPVCT en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of 74FCT162501ATPVCT in technical solutions:
Q: What is the 74FCT162501ATPVCT? A: The 74FCT162501ATPVCT is a 16-bit registered transceiver with 3-state outputs, designed for high-performance bus interface applications.
Q: What is the purpose of the 74FCT162501ATPVCT? A: The purpose of this IC is to provide bidirectional data transfer between two buses with different voltage levels or signal types.
Q: What voltage levels does the 74FCT162501ATPVCT support? A: It supports voltage levels ranging from 2.5V to 5.5V, making it compatible with a wide range of systems.
Q: Can I use the 74FCT162501ATPVCT in both synchronous and asynchronous applications? A: Yes, this IC can be used in both synchronous and asynchronous applications, depending on your specific requirements.
Q: How many data lines can the 74FCT162501ATPVCT handle? A: It can handle up to 16 data lines, making it suitable for applications that require parallel data transfer.
Q: Does the 74FCT162501ATPVCT have built-in protection features? A: Yes, it has built-in ESD protection, which helps safeguard against electrostatic discharge events.
Q: Can I use the 74FCT162501ATPVCT in hot-swapping applications? A: Yes, this IC supports hot-swapping, allowing you to connect or disconnect devices while the system is powered on.
Q: What is the maximum data transfer rate of the 74FCT162501ATPVCT? A: The maximum data transfer rate is typically around 200 MHz, ensuring high-speed operation in most applications.
Q: Does the 74FCT162501ATPVCT have any power-saving features? A: Yes, it has a low-power standby mode that helps conserve energy when the IC is not actively transferring data.
Q: Can I use the 74FCT162501ATPVCT in industrial environments? A: Yes, this IC is designed to operate reliably in industrial temperature ranges, making it suitable for harsh environments.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.