Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
LM94CIMTX
Ver Detalle Hojas de datos

LM94CIMTX

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Temperature Sensor
  • Characteristics:
    • High accuracy
    • Digital output
    • Low power consumption
  • Package: Small Outline Package (SOP)
  • Essence: Measures temperature and provides digital output for various applications
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Temperature Range: -40°C to +125°C
  • Accuracy: ±1°C (typical)
  • Resolution: 0.0625°C
  • Supply Voltage: 2.7V to 5.5V
  • Interface: I2C/SMBus compatible
  • Operating Current: 200µA (typical)

Detailed Pin Configuration

The LM94CIMTX has a total of 8 pins, which are assigned as follows:

  1. VDD: Supply voltage input
  2. GND: Ground reference
  3. SDA: Serial Data Line (I2C interface)
  4. SCL: Serial Clock Line (I2C interface)
  5. ALERT#: Open-drain output for temperature alert
  6. A0: Address selection bit 0
  7. A1: Address selection bit 1
  8. NC: No connection

Functional Features

  • Measures temperature with high accuracy
  • Provides digital output in degrees Celsius
  • Supports I2C/SMBus interface for easy integration
  • Programmable temperature alert feature
  • Low power consumption for energy-efficient applications

Advantages

  • High accuracy ensures precise temperature measurements
  • Digital output simplifies data processing and analysis
  • Wide temperature range allows for versatile applications
  • Low power consumption prolongs battery life in portable devices
  • Compact SOP package enables space-saving designs

Disadvantages

  • Limited to temperature sensing applications
  • Requires I2C/SMBus interface for communication
  • Accuracy may vary in extreme temperature conditions

Working Principles

The LM94CIMTX utilizes a built-in temperature sensor to measure the ambient temperature. It converts the analog temperature signal into a digital format using an internal analog-to-digital converter (ADC). The digital temperature value is then made available through the I2C/SMBus interface, allowing easy integration with microcontrollers or other digital systems.

Detailed Application Field Plans

The LM94CIMTX can be used in various applications that require accurate temperature monitoring. Some potential application fields include:

  1. Consumer Electronics:

    • Smartphones and tablets
    • Laptops and desktop computers
    • Gaming consoles

  2. Industrial Automation:

    • HVAC systems
    • Process control equipment
    • Temperature-sensitive manufacturing processes

  3. Automotive:

    • Engine temperature monitoring
    • Climate control systems
    • Battery temperature management

  4. Medical Devices:

    • Patient monitoring systems
    • Laboratory equipment
    • Temperature-controlled storage units

Detailed and Complete Alternative Models

  1. LM75A: Digital temperature sensor with I2C interface, ±2°C accuracy, and 0.5°C resolution.
  2. TMP102: Low-power digital temperature sensor with I2C interface, ±0.5°C accuracy, and 0.0625°C resolution.
  3. DS18B20: Programmable digital temperature sensor with 1-Wire interface, ±0.5°C accuracy, and 0.0625°C resolution.

These alternative models offer similar functionality to the LM94CIMTX and can be considered based on specific application requirements.

Word count: 520 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de LM94CIMTX en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of LM94CIMTX in technical solutions:

  1. Q: What is LM94CIMTX? A: LM94CIMTX is a temperature sensor and system monitor integrated circuit (IC) manufactured by Texas Instruments.

  2. Q: What are the key features of LM94CIMTX? A: LM94CIMTX offers accurate temperature measurement, multiple temperature channels, programmable temperature limits, and digital interface compatibility.

  3. Q: How many temperature channels does LM94CIMTX support? A: LM94CIMTX supports up to four temperature channels, allowing for monitoring of multiple temperature points simultaneously.

  4. Q: Can LM94CIMTX measure temperatures outside its specified range? A: No, LM94CIMTX has a specified temperature range, typically from -40°C to +125°C, and cannot accurately measure temperatures beyond this range.

  5. Q: How does LM94CIMTX communicate with other devices? A: LM94CIMTX uses an I2C/SMBus-compatible digital interface to communicate with microcontrollers or other devices.

  6. Q: Can LM94CIMTX be used in battery-powered applications? A: Yes, LM94CIMTX has low power consumption and can be used in battery-powered applications without significantly draining the battery.

  7. Q: Does LM94CIMTX provide any built-in fault detection or protection features? A: Yes, LM94CIMTX includes various fault detection mechanisms such as thermal shutdown, over-temperature alert, and open/short-circuit detection.

  8. Q: Can LM94CIMTX be used in industrial environments? A: Yes, LM94CIMTX is suitable for industrial environments as it can operate reliably in a wide temperature range and is resistant to electromagnetic interference.

  9. Q: Can LM94CIMTX be used for fan control applications? A: Yes, LM94CIMTX includes features like programmable temperature limits and fan control outputs, making it suitable for fan control applications.

  10. Q: Are there any evaluation boards or development kits available for LM94CIMTX? A: Yes, Texas Instruments provides evaluation boards and development kits that can help users quickly prototype and evaluate LM94CIMTX-based solutions.

Please note that the answers provided here are general and may vary depending on specific application requirements and implementation details.