Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
SN74AHC594DG4
Ver Detalle Hojas de datos

SN74AHC594DG4

Product Overview

Category

SN74AHC594DG4 belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a shift register and storage device in various electronic applications.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Schmitt-trigger inputs for noise immunity
  • Output current capability: ±8 mA at VCC = 5 V

Package

SN74AHC594DG4 is available in a 16-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of SN74AHC594DG4 lies in its ability to efficiently shift and store digital data, making it an essential component in many electronic systems.

Packaging/Quantity

SN74AHC594DG4 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage Range: 2 V to 5.5 V
  • Operating Temperature Range: -40°C to +85°C
  • Input Voltage Range: 0 V to VCC
  • Output Voltage Range: 0 V to VCC
  • Maximum Clock Frequency: 100 MHz

Detailed Pin Configuration

  1. Q0 (Output)
  2. Q1 (Output)
  3. Q2 (Output)
  4. Q3 (Output)
  5. Q4 (Output)
  6. Q5 (Output)
  7. Q6 (Output)
  8. Q7 (Output)
  9. GND (Ground)
  10. SER (Serial Data Input)
  11. RCLK (Register Clock Input)
  12. SRCLK (Shift Register Clock Input)
  13. OE (Output Enable)
  14. SRCLR (Shift Register Clear)
  15. VCC (Supply Voltage)
  16. Q7' (Output)

Functional Features

  • Serial-to-parallel data conversion
  • Parallel data storage
  • Cascadable for larger shift register applications
  • Output enable control for multiplexing applications
  • Shift register clear function for initialization

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data transfer
  • Low power consumption helps in energy-efficient designs
  • Wide operating voltage range provides flexibility in various systems
  • Schmitt-trigger inputs ensure noise immunity, improving reliability

Disadvantages

  • Limited number of output pins (8 in this case)
  • Requires external clock signals for proper operation

Working Principles

SN74AHC594DG4 operates based on the principles of serial-in, parallel-out shifting. It receives serial data through the SER pin and shifts it into its internal shift register upon receiving a clock signal at the SRCLK pin. The RCLK pin is used to latch the shifted data into the parallel output registers. The output enable (OE) pin controls the activation of the outputs.

Detailed Application Field Plans

SN74AHC594DG4 finds applications in various fields, including but not limited to: 1. Data communication systems 2. Industrial automation 3. Automotive electronics 4. Consumer electronics 5. Robotics 6. LED displays 7. Instrumentation

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to SN74AHC594DG4 are: 1. 74HC595 2. CD4094 3. 74LS164 4. 74HCT595 5. CD4021

These models offer similar functionality and can be used as substitutes depending on specific requirements.

In conclusion, SN74AHC594DG4 is a versatile integrated circuit that serves as a shift register and storage device. Its high-speed operation, low power consumption, and wide operating voltage range make it suitable for various applications. However, it has a limited number of output pins and requires external clock signals for proper functioning. It finds applications in data communication systems, industrial automation, automotive electronics, and more. Alternative models such as 74HC595 and CD4094 can be considered based on specific needs.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de SN74AHC594DG4 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of SN74AHC594DG4 in technical solutions:

  1. Q: What is the SN74AHC594DG4? A: The SN74AHC594DG4 is a high-speed, 8-bit shift register with output latches. It can be used to expand the number of outputs available in a microcontroller or other digital system.

  2. Q: What is the maximum clock frequency supported by the SN74AHC594DG4? A: The SN74AHC594DG4 can support clock frequencies up to 100 MHz.

  3. Q: How many outputs can be controlled using the SN74AHC594DG4? A: The SN74AHC594DG4 has 8 outputs that can be individually controlled.

  4. Q: Can the SN74AHC594DG4 be cascaded to control more than 8 outputs? A: Yes, multiple SN74AHC594DG4 chips can be cascaded together to control a larger number of outputs.

  5. Q: What is the voltage range supported by the SN74AHC594DG4? A: The SN74AHC594DG4 supports a voltage range of 2 V to 5.5 V.

  6. Q: Does the SN74AHC594DG4 have built-in protection against overvoltage or short circuits? A: No, the SN74AHC594DG4 does not have built-in protection against overvoltage or short circuits. External protection circuitry may be required.

  7. Q: Can the SN74AHC594DG4 be used for driving LEDs? A: Yes, the SN74AHC594DG4 can be used to drive LEDs by connecting the LED cathodes to the outputs and using appropriate current-limiting resistors.

  8. Q: What is the power supply current consumption of the SN74AHC594DG4? A: The power supply current consumption of the SN74AHC594DG4 depends on the operating conditions, but typically ranges from 2 mA to 10 mA.

  9. Q: Can the SN74AHC594DG4 be used in automotive applications? A: Yes, the SN74AHC594DG4 is qualified for automotive applications and can operate in a wide temperature range.

  10. Q: Are there any application notes or reference designs available for the SN74AHC594DG4? A: Yes, Texas Instruments provides application notes and reference designs for the SN74AHC594DG4 on their website, which can help with designing and implementing solutions using this chip.

Please note that these answers are general and may vary depending on specific implementation requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.