The SN74AUP1T158DCKR has the following pin configuration:
____
A --| |-- VCC
B --| |-- Y
GND/VSS --|____|-- NC
The SN74AUP1T158DCKR is a single 2-input multiplexer that selects one of the two input signals (A or B) based on the control signal. The selected input is then routed to the output pin (Y). It operates using high-speed CMOS technology, which ensures fast switching times and low power consumption.
The SN74AUP1T158DCKR can be used in various applications, including:
Some alternative models that offer similar functionality to the SN74AUP1T158DCKR are:
These alternative models provide different features and specifications, allowing designers to choose the most suitable option for their specific application requirements.
Word count: 386 words
Sure! Here are 10 common questions and answers related to the application of SN74AUP1T158DCKR in technical solutions:
Q1: What is the SN74AUP1T158DCKR? A1: The SN74AUP1T158DCKR is a single bus switch with configurable voltage translation and integrated pull-up resistors.
Q2: What is the voltage range supported by SN74AUP1T158DCKR? A2: The SN74AUP1T158DCKR supports voltage translation from 0.8V to 3.6V.
Q3: How many channels does the SN74AUP1T158DCKR have? A3: The SN74AUP1T158DCKR has one channel.
Q4: Can the SN74AUP1T158DCKR be used for bidirectional level shifting? A4: No, the SN74AUP1T158DCKR is unidirectional and can only shift voltage from one direction to another.
Q5: What is the maximum data rate supported by SN74AUP1T158DCKR? A5: The SN74AUP1T158DCKR supports a maximum data rate of 100 Mbps.
Q6: Does the SN74AUP1T158DCKR have built-in pull-up resistors? A6: Yes, the SN74AUP1T158DCKR has integrated pull-up resistors.
Q7: Can the SN74AUP1T158DCKR be used in battery-powered applications? A7: Yes, the SN74AUP1T158DCKR is designed to operate in low-power applications, including battery-powered devices.
Q8: What is the package type of SN74AUP1T158DCKR? A8: The SN74AUP1T158DCKR is available in a small SOT-353 package.
Q9: Can the SN74AUP1T158DCKR be used in automotive applications? A9: Yes, the SN74AUP1T158DCKR is qualified for automotive applications and meets the AEC-Q100 standard.
Q10: What are some typical applications of SN74AUP1T158DCKR? A10: Some typical applications of SN74AUP1T158DCKR include voltage level translation, I2C bus interfacing, and general-purpose signal switching.
Please note that these answers are general and may vary depending on specific use cases and requirements.