Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
SN74LV595ADRG3
Ver Detalle Hojas de datos

SN74LV595ADRG3

Overview

  • Category: Integrated Circuit (IC)
  • Use: Shift Register
  • Characteristics:
    • Low-voltage operation
    • Serial-in, parallel-out functionality
    • High-speed data transfer
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Serial to parallel data conversion
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 2V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Clock Frequency: 100 MHz
  • Number of Outputs: 8
  • Number of Inputs: 1
  • Number of Pins: 16

Pin Configuration

The SN74LV595ADRG3 has a total of 16 pins. The pin configuration is as follows:

| Pin No. | Name | Description | |---------|------|-------------| | 1 | QH' | Serial Data Output | | 2 | QH | Serial Data Output | | 3 | GND | Ground | | 4 | SER | Serial Data Input | | 5 | RCLK | Register Clock Input | | 6 | SRCLK| Shift Register Clock Input | | 7 | OE | Output Enable Input | | 8 | SRCLR| Shift Register Clear Input | | 9 | QA | Parallel Data Output | | 10 | QB | Parallel Data Output | | 11 | QC | Parallel Data Output | | 12 | QD | Parallel Data Output | | 13 | QE | Parallel Data Output | | 14 | QF | Parallel Data Output | | 15 | QG | Parallel Data Output | | 16 | VCC | Supply Voltage |

Functional Features

  • Serial-in, parallel-out functionality allows for efficient data transfer.
  • High-speed clocking enables quick processing of data.
  • Output enable input (OE) provides control over the output state.
  • Shift register clear input (SRCLR) resets the shift register to its initial state.

Advantages

  • Low-voltage operation makes it suitable for battery-powered devices.
  • Compact SOIC package saves space on the circuit board.
  • High-speed data transfer ensures efficient data processing.

Disadvantages

  • Limited number of outputs (8) may not be sufficient for certain applications.
  • Lack of built-in error detection or correction mechanisms.

Working Principles

The SN74LV595ADRG3 is a shift register IC that converts serial data into parallel data. It operates based on the principle of sequential data shifting. The serial data is input through the SER pin and shifted into the shift register with each rising edge of the shift register clock (SRCLK) input. The data is then transferred to the parallel outputs (QA-QH) when the register clock (RCLK) input transitions from high to low. The output enable (OE) input controls the output state, allowing the user to enable or disable the parallel outputs.

Detailed Application Field Plans

The SN74LV595ADRG3 is commonly used in various applications, including: 1. LED Display Control: The shift register can be used to control multiple LEDs, enabling dynamic lighting effects. 2. Serial to Parallel Conversion: It can be utilized to convert serial data from sensors or communication interfaces into parallel data for further processing. 3. Data Multiplexing: The shift register can be employed to multiplex multiple data sources onto a single bus, reducing the number of required input/output pins.

Detailed and Complete Alternative Models

  1. SN74HC595: Similar shift register IC with higher operating voltage range (2V to 6V).
  2. CD4094: Another shift register IC with similar functionality but different pin configuration.
  3. 74LS164: Shift register IC with parallel-in, serial-out functionality.

Note: The above alternatives are just a few examples; there are several other alternative models available in the market.

Word count: 496 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de SN74LV595ADRG3 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of SN74LV595ADRG3:

  1. Q: What is SN74LV595ADRG3? A: SN74LV595ADRG3 is a shift register IC (integrated circuit) that can be used for serial-to-parallel data conversion in various technical solutions.

  2. Q: What is the maximum operating voltage for SN74LV595ADRG3? A: The maximum operating voltage for SN74LV595ADRG3 is 5.5V.

  3. Q: How many output pins does SN74LV595ADRG3 have? A: SN74LV595ADRG3 has 8 output pins, which can be used to control external devices such as LEDs or relays.

  4. Q: Can SN74LV595ADRG3 be cascaded to increase the number of outputs? A: Yes, SN74LV595ADRG3 can be cascaded by connecting the serial output of one chip to the serial input of another, allowing for expansion of the number of outputs.

  5. Q: What is the maximum clock frequency for SN74LV595ADRG3? A: The maximum clock frequency for SN74LV595ADRG3 is typically around 100 MHz.

  6. Q: Does SN74LV595ADRG3 require external pull-up resistors for its inputs? A: No, SN74LV595ADRG3 has internal pull-up resistors on its inputs, so external pull-up resistors are not necessary.

  7. Q: Can SN74LV595ADRG3 be used with both CMOS and TTL logic levels? A: Yes, SN74LV595ADRG3 is compatible with both CMOS (3.3V) and TTL (5V) logic levels.

  8. Q: What is the power supply voltage range for SN74LV595ADRG3? A: The power supply voltage range for SN74LV595ADRG3 is typically between 2V and 5.5V.

  9. Q: Can SN74LV595ADRG3 be used in high-temperature environments? A: Yes, SN74LV595ADRG3 has a wide operating temperature range of -40°C to 125°C, making it suitable for various applications.

  10. Q: Are there any application notes or reference designs available for SN74LV595ADRG3? A: Yes, Texas Instruments provides application notes and reference designs for SN74LV595ADRG3 on their website, which can help with implementing the IC in different technical solutions.

Please note that these answers are general and may vary depending on specific requirements and use cases. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.