Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TAS5613ADKD
Ver Detalle Hojas de datos

TAS5613ADKD

Product Overview

Category

TAS5613ADKD belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in audio amplification applications.

Characteristics

  • High efficiency
  • Low distortion
  • Wide dynamic range
  • Excellent audio quality

Package

TAS5613ADKD is available in a compact and durable package, ensuring easy installation and protection against external factors.

Essence

The essence of TAS5613ADKD lies in its ability to provide high-quality audio amplification with minimal distortion and maximum efficiency.

Packaging/Quantity

This product is typically packaged in reels or tubes, with varying quantities depending on customer requirements.

Specifications

  • Power Supply Voltage: 10V - 26V
  • Output Power: 150W per channel
  • Total Harmonic Distortion + Noise: <0.03%
  • Signal-to-Noise Ratio: >100dB
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. VDD: Power supply voltage input
  2. GND: Ground reference
  3. INP: Positive differential audio input
  4. INN: Negative differential audio input
  5. SD: Shutdown control input
  6. MUTE: Mute control input
  7. PVCC: Power supply voltage for internal circuitry
  8. OUTA: Amplifier output A
  9. OUTB: Amplifier output B
  10. PGND: Ground reference for amplifier outputs

Functional Features

  • High-efficiency Class D operation
  • Advanced modulation scheme for low distortion
  • Built-in protection circuitry against overcurrent and overtemperature
  • Shutdown and mute control for power management
  • Differential audio inputs for noise rejection

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Low distortion ensures accurate audio reproduction
  • Wide dynamic range for enhanced audio performance
  • Compact package allows for space-saving installations

Disadvantages

  • Requires external components for a complete audio system
  • Limited output power compared to some other amplifiers

Working Principles

TAS5613ADKD operates on the Class D amplification principle, where the input audio signal is modulated onto a high-frequency carrier wave. This modulated signal is then amplified using switching transistors, resulting in efficient power conversion and minimal heat dissipation. The amplified signal is then filtered and delivered to the connected speakers.

Detailed Application Field Plans

TAS5613ADKD finds applications in various audio systems, including: 1. Home theater systems 2. Professional audio equipment 3. Automotive sound systems 4. Portable audio devices

Detailed and Complete Alternative Models

  1. TAS5612ADKD: Similar to TAS5613ADKD but with lower output power.
  2. TAS5614ADKD: Higher-powered version of TAS5613ADKD.
  3. TAS5615ADKD: Enhanced features and higher efficiency compared to TAS5613ADKD.

(Note: The above alternative models are from the same product family and share similar characteristics.)

In conclusion, TAS5613ADKD is a highly efficient audio amplifier IC that offers excellent audio quality and low distortion. Its compact package and wide range of applications make it a popular choice among audio enthusiasts.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TAS5613ADKD en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TAS5613ADKD in technical solutions:

  1. Q: What is TAS5613ADKD? A: TAS5613ADKD is a high-performance, digital input, stereo audio amplifier that can be used in various audio applications.

  2. Q: What are the key features of TAS5613ADKD? A: The key features of TAS5613ADKD include high efficiency, low distortion, wide dynamic range, integrated protection circuitry, and flexible digital audio interface options.

  3. Q: What is the maximum output power of TAS5613ADKD? A: TAS5613ADKD can deliver up to 150 watts per channel into a 4-ohm load or 100 watts per channel into an 8-ohm load.

  4. Q: Can TAS5613ADKD be used in automotive audio systems? A: Yes, TAS5613ADKD is suitable for automotive audio systems as it operates from a wide supply voltage range and has built-in protection features.

  5. Q: What are the recommended power supply requirements for TAS5613ADKD? A: TAS5613ADKD requires a power supply voltage between 10V and 26V, with a recommended supply voltage of 24V.

  6. Q: Does TAS5613ADKD support different audio input formats? A: Yes, TAS5613ADKD supports various digital audio input formats such as I2S, left-justified, right-justified, and TDM.

  7. Q: Can TAS5613ADKD be used in multi-channel audio systems? A: Yes, multiple TAS5613ADKD amplifiers can be used together to create a multi-channel audio system.

  8. Q: Does TAS5613ADKD require external components for operation? A: Yes, TAS5613ADKD requires external passive components such as resistors, capacitors, and inductors for proper operation.

  9. Q: Is TAS5613ADKD compatible with digital volume control? A: Yes, TAS5613ADKD supports digital volume control through the use of an external microcontroller or DSP.

  10. Q: Are evaluation modules or reference designs available for TAS5613ADKD? A: Yes, Texas Instruments provides evaluation modules and reference designs that can help in the development and implementation of TAS5613ADKD-based solutions.

Please note that these answers are general and may vary depending on specific application requirements and design considerations.