La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TMP75AIDR

TMP75AIDR

Product Overview

  • Category: Temperature Sensor
  • Use: Monitoring and controlling temperature in various electronic devices and systems
  • Characteristics: High accuracy, low power consumption, small form factor
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Provides precise digital temperature measurements
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Temperature Range: -55°C to +125°C
  • Accuracy: ±1°C
  • Resolution: 9 to 12 bits
  • Supply Voltage: 2.7V to 5.5V
  • Power Consumption: 6µA (typical)

Detailed Pin Configuration

  1. GND (Ground)
  2. SDA (Serial Data)
  3. SCL (Serial Clock)
  4. A0 (Address Select)
  5. A1 (Address Select)
  6. ALERT (Open-drain output)
  7. OS (Overtemperature Shutdown)
  8. VCC (Supply Voltage)

Functional Features

  • Digital output
  • Programmable resolution
  • Low standby current
  • Shutdown mode for power savings
  • SMBus and I2C compatible interfaces

Advantages

  • High accuracy over a wide temperature range
  • Low power consumption
  • Small form factor
  • Easy interfacing with microcontrollers

Disadvantages

  • Limited temperature range compared to some other sensors
  • Requires careful PCB layout for optimal performance

Working Principles

The TMP75AIDR operates by converting the analog voltage output from an on-chip temperature sensor into a digital value that can be read by a microcontroller. It uses the I2C or SMBus interface to communicate the temperature data to the host system.

Detailed Application Field Plans

The TMP75AIDR is suitable for a wide range of applications including: - Consumer electronics - Industrial automation - Automotive systems - Medical devices - HVAC (Heating, Ventilation, and Air Conditioning) systems

Detailed and Complete Alternative Models

  1. LM75A
    • Similar temperature range and accuracy
    • Also uses I2C interface
    • Available in different package options
  2. DS18B20
    • Higher temperature range
    • One-wire interface
    • Digital output with programmable resolution

In conclusion, the TMP75AIDR is a versatile and reliable temperature sensor suitable for various electronic applications. Its high accuracy, low power consumption, and small form factor make it a popular choice among designers and engineers.

[Word Count: 366]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TMP75AIDR en soluciones técnicas

  1. What is the operating voltage range of TMP75AIDR?

    • The operating voltage range of TMP75AIDR is 2.7V to 5.5V.
  2. What is the temperature accuracy of TMP75AIDR?

    • The temperature accuracy of TMP75AIDR is ±1°C (maximum) from -25°C to +85°C.
  3. Can TMP75AIDR be used in automotive applications?

    • Yes, TMP75AIDR can be used in automotive applications as it is AEC-Q100 qualified.
  4. What is the I2C address of TMP75AIDR?

    • The I2C address of TMP75AIDR is 0x48 by default and can be changed by modifying the address pins.
  5. Does TMP75AIDR have hysteresis for temperature measurements?

    • Yes, TMP75AIDR has programmable hysteresis to minimize temperature sensor output noise.
  6. What is the power consumption of TMP75AIDR?

    • The power consumption of TMP75AIDR is very low, typically 10µA.
  7. Is TMP75AIDR suitable for battery-powered applications?

    • Yes, TMP75AIDR is suitable for battery-powered applications due to its low power consumption.
  8. Can TMP75AIDR be used in industrial control systems?

    • Yes, TMP75AIDR is suitable for industrial control systems due to its wide temperature range and high accuracy.
  9. Does TMP75AIDR have any built-in non-volatile memory?

    • No, TMP75AIDR does not have built-in non-volatile memory, so external EEPROM may be required for storing configuration settings.
  10. Is TMP75AIDR RoHS compliant?

    • Yes, TMP75AIDR is RoHS compliant, making it suitable for environmentally conscious designs.