Torex Semiconductor Ltd
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
XC6108C20CGR-G
Ver Detalle Hojas de datos

XC6108C20CGR-G

Product Overview

Category

XC6108C20CGR-G belongs to the category of voltage regulators.

Use

It is primarily used for voltage regulation in electronic circuits.

Characteristics

  • Package: CGR (SOT-89)
  • Essence: Voltage regulator IC
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

The specifications of XC6108C20CGR-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 2.0V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C20CGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

The functional features of XC6108C20CGR-G include:

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient voltage regulation. - Low quiescent current minimizes power consumption. - Overcurrent, thermal shutdown, and short-circuit protections enhance reliability.

Disadvantages: - Limited output current capacity (150mA).

Working Principles

XC6108C20CGR-G operates based on a voltage regulation principle. It takes an input voltage within the specified range and provides a stable output voltage of 2.0V. The internal circuitry of the IC regulates the voltage by adjusting the current flow.

Detailed Application Field Plans

XC6108C20CGR-G finds applications in various electronic devices and circuits, including but not limited to:

  1. Battery-powered devices
  2. Portable electronics
  3. IoT devices
  4. Wearable devices
  5. Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C20CGR-G are:

  1. XC6206P332MR-G: Output voltage of 3.3V, output current of 200mA.
  2. XC6210B182MR-G: Output voltage of 1.8V, output current of 150mA.
  3. XC6220B122MR-G: Output voltage of 1.2V, output current of 100mA.

These alternative models provide different output voltages and currents to suit specific application requirements.

Word count: 314 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de XC6108C20CGR-G en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of XC6108C20CGR-G in technical solutions:

  1. Q: What is XC6108C20CGR-G? A: XC6108C20CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108C20CGR-G? A: The operating voltage range of XC6108C20CGR-G is typically from 0.9V to 6.0V.

  3. Q: How does XC6108C20CGR-G help in technical solutions? A: XC6108C20CGR-G helps ensure stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to initiate a safe system restart when the voltage drops below a specified level.

  4. Q: Can XC6108C20CGR-G be used in battery-powered applications? A: Yes, XC6108C20CGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  5. Q: What is the typical reset threshold voltage of XC6108C20CGR-G? A: The typical reset threshold voltage of XC6108C20CGR-G is 2.0V.

  6. Q: Does XC6108C20CGR-G have any built-in delay time for the reset signal? A: Yes, XC6108C20CGR-G has a built-in fixed delay time of approximately 200ms to ensure stable power supply before releasing the reset signal.

  7. Q: Can XC6108C20CGR-G be used in automotive applications? A: Yes, XC6108C20CGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Q: What is the package type of XC6108C20CGR-G? A: XC6108C20CGR-G is available in a compact SOT-25 package.

  9. Q: Is XC6108C20CGR-G compatible with other microcontrollers or processors? A: Yes, XC6108C20CGR-G can be easily integrated with various microcontrollers or processors as it has an open-drain output and operates at a wide voltage range.

  10. Q: Can XC6108C20CGR-G be used in industrial control systems? A: Yes, XC6108C20CGR-G is suitable for industrial control systems as it provides reliable power supply monitoring and reset functionality to ensure system stability.